Read the forum code of contact
By: 21st August 2020 at 21:01 Permalink
-Thanks for the heads up on this, PM sent
By: 22nd August 2020 at 12:40 Permalink
-Hello, would you by any chance have serviceable oil px gauge for a Chipmunk?
By: 22nd August 2020 at 15:22 Permalink
-Ditto for the Oil Px gauge, but a U/S one would be perfect
John
By: 22nd August 2020 at 22:51 Permalink
-Couldn’t send a pm for some unknown reason but are there any BTH AG4 mags? Thanks
By: 23rd August 2020 at 10:43 Permalink
-Morning Aeronut2019 - another one struggling with PMs; I know that Newark Air Museum has been looking for a top canopy glazing for their Skeeter since 1981 and that any possible leads would be appreciated!
By: 24th August 2020 at 08:15 Permalink
-Saw this on FB and have just found your message, I shall email you.
By: 25th August 2020 at 18:14 Permalink
-The Forum's PM system seems to be a little clunky and hopefully I've replied to those of you who sent a PM giving you my e-mail address.
The process of sorting out what we can dispose of is going to be a little lengthy, the engineering team are only in two days a week and we have nine airframes (2 x Scout, 2 x Sioux, Auster, Beaver, Chipmunk and Skeeter) to work on to keep or make airworthy.
Below is a photograph of a quarter of the boxes that have to be sorted through, parts counted before the decision is made to keep or dispose.
Please bear with us.
By: 31st August 2020 at 12:51 Permalink
-Hello, PM will not work. Interested in AOP9 Airframe.
If you can try to PM me it may work, and I will respond.
By: 31st August 2020 at 18:01 Permalink
-Turbulent Times, and any other interested parties forget trying to contact me via the forum's PM system, go direct and follow this link to the HAAF's website. https://haftech.co.uk/spares-for-sale/
By: 9th September 2020 at 18:48 Permalink
-Turbulent Times, you expressed an interest in Auster AOP9 airframe. I don't know if its just parts or a complete aircraft you were after but our spare Auster airframe is available.
If anyone is interested please contact https://haftech.co.uk/spares-for-sale/
By: 9th September 2020 at 19:20 Permalink
-A small collection of avionics, Auster AOP 9 magneto and Beaver flare pistol pocket all available for a donation to the HAAF chartable trust.
By: 5th October 2020 at 12:19 Permalink
-Just wondered how the sorting out is going, as haven’t heard anything of late?
By: 6th October 2020 at 11:18 Permalink
-Sopwith, PM inbound.
By: 8th October 2020 at 19:01 Permalink
-Thanks Aeronut p.m. sent too.
Posts: 40
By: Aeronut2019 - 21st August 2020 at 20:39
With storage space tight and little or no flying due to Covid the HAAF engineering team have started sorting through their extensive spares holdings. The decision has been made to have a clear out of those spares that are not required to keep the HAAF fleet (Beaver, Scout, Sioux, Auster AOP 9 and Chipmunk) flying and I have taken on the task of saving them from the scrap bin.
There is quite a mix of stuff that could be available ranging from engines in bits or complete but U/S (ie possibly repairable but with no paperwork). Airframe components such as these Chipmunk bits in the photograph. Avionics (both Serviceable and U/S), NOS hoses (over 10 years old so no good for the flyers). Rotor heads and gearboxes (could possibly be serviceable but again no paperwork so U/S).
If you need ANYTHING for a Beaver, Scout, Sioux, Auster AOP 9, Chipmunk, Skeeter or Allouette PM me, the worst it can be is a reply of "Sorry non of those available" but if they are we can discuss terms.