Read the forum code of contact
By: 6th December 2017 at 11:13 Permalink - Edited 1st January 1970 at 01:00
-Jupiter VIIF - any help?
By: 6th December 2017 at 11:44 Permalink - Edited 1st January 1970 at 01:00
-19 minutes and someone comes up with the above, now that is why i very much like this forum, well done
By: 6th December 2017 at 12:33 Permalink - Edited 1st January 1970 at 01:00
-One dog walk later and a brilliant result on my return. Thank you so much TerryP. This will help narrow down the grey areas.
Again thank you.
Cheers
John
By: 6th December 2017 at 21:39 Permalink - Edited 1st January 1970 at 01:00
-And Pegasus IIL:-
By: 7th December 2017 at 07:40 Permalink - Edited 1st January 1970 at 01:00
-Wow, amazing! :)
What about Hercules? Any chance?
Juraj
By: 7th December 2017 at 16:33 Permalink - Edited 1st January 1970 at 01:00
-Terry,
Those are exactly what I was hoping for. Again I can't thank you enough.
Cheers
John
By: 8th December 2017 at 17:54 Permalink - Edited 1st January 1970 at 01:00
-No, the Jupiter drawing is from the AP dated 1930, and the Pegasus from a Bristol handbook. Neither have any real title block with drawn by etc.
TerryP
By: 9th December 2017 at 22:15 Permalink - Edited 1st January 1970 at 01:00
-TerryP
No hassle but did you have a personal email from me? I've sent a couple through the forum recently and had no reply to either and one was an answer to a friend.
Regards
John
By: 9th December 2017 at 23:09 Permalink - Edited 1st January 1970 at 01:00
-John,
Nothing received (yet).
Posts: 2,766
By: John Aeroclub - 6th December 2017 at 10:56
I'm engaged in drawing the Westland Wapiti / Wallace aircraft family. Can anyone help please with the following.
I need scans of the following engine information, so if any forum member has a side view dimensioned drawing for the Jupiter VI, such as might be found in the AP or engine manual, also the same for the Pegasus IIM or Pegasus IV. I have the dimensions I need for the Jupiter VIII the from drawing in the Jagan book "The Westland Wapiti in the Indian Air Force. The most needed dimension in each case is that from the engine mounting plate to the tip of the propeller shaft.
I have some dimensions from the American built Bliss Jupiter's and if these mirror the Bristol ones (as I suspect they will) then I need to find a troublesome 2.5" difference in the overall lengths of the Wapiti II and IIA.
Cheers
John